OEM / ODM DIAGNOSTIC CABLE ASSEMBLIES
Custom OBD Cables
Custom OBD2 cable assemblies for diagnostic tool manufacturers, telematics device developers and OEM integration teams.
- Drawing, sample and BOM-based development
- Specify connector orientation, cable length and pin mapping
- Prototype builds through repeat production
- Agree inspection criteria before manufacture
Xinshao — Custom OBD Cable Assembly Manufacturer
Shijiazhuang Xinshao Electronic Technology Co., Ltd. supports custom wire harness and cable assembly development from drawings, samples or a bill of materials. This collection organizes OBD cable configurations around the needs of equipment manufacturers and integration teams.
Discuss a custom 16-pin OBD2 cable, a male-to-female extension, a branched telematics harness or a device-specific adapter. Define the electrical connections and mechanical envelope together: a matching connector alone does not establish vehicle, protocol or device compatibility.
OBD Cable Configurations for OEM Projects
Custom OBD2 Extension Cables
Male-to-female extensions with specified length, conductor population and port orientation for diagnostic equipment integration.
OBD2 Y Splitter Cables
Branch layouts for telematics hardware and service-port access. Define which circuits pass through and which feed the device.
Low-Profile Right-Angle OBD Cables
Connector exit direction and low-profile geometry configured around dashboard clearance and installation access.
OBD2 to DB9 Adapter Cables
Drawing-based adapters for CAN interfaces and data loggers. DB9 assignments must match the exact target device.
OBD2 to Open-End Harnesses
Stripped, tinned or terminated wire ends for OEM integration, with wire identification and a controlled pin-to-wire schedule.
Custom OBD Telematics T-Harnesses
Device-specific branches, power routing and mounting provisions for fleet hardware projects, subject to engineering review.
6 Configurations · Built to approved specifications
OBD Cable Manufacturing Support
01
Drawing-Based Development
Review your pinout, BOM and installation drawing before material selection.
02
Connector & Routing Choices
Specify straight or angled exits, branch lengths, mounting details and device-side interfaces.
03
Prototype to Production
Coordinate sample requirements, approved revisions and repeat production quantities.
04
Defined Inspection Criteria
Agree continuity, insulation and other required checks against the assembly specification.
Choose a Custom OBD Cable Supplier Around Your Integration Needs
For diagnostic equipment and fleet electronics, connector fit is only the first checkpoint. Confirm port access, device power demand, pin assignments and the installation space before approving a cable design.
Xinshao can review your drawing and component requirements, propose manufacturing details and coordinate sample acceptance. Identify controlled components and permitted alternatives early to avoid sourcing changes after validation.
Custom OBD2 Cable Assemblies, Configured for Your Device
Start with your equipment interface and routing envelope. Specify overall length, branch lengths, connector gender, cable exit orientation and any panel or bracket mounting requirements.
For a custom OBD2 splitter cable or telematics T-harness, provide a connection schedule for every branch. Review bus topology, device loading and service-port access with your system engineer; a passive harness does not convert protocols.
Approve the sample against the controlled drawing before releasing production. Quote timing, tooling costs and delivery depend on the selected components and project quantities.
OBD Cable Materials & Component Selection
Select a cable construction for the actual electrical load, installation and service environment.
- Conductor size and populated circuits matched to the approved pinout
- Jacket, flexibility and temperature requirements specified by the application
- Connector part numbers, contact plating and mating requirements
- Shielding, twisted pairs and strain relief where the design requires them
Assembly, Overmolding & Inspection
Plan the manufacturing process around the approved design and agreed acceptance criteria.
- Wire processing, termination and connector assembly
- Overmold geometry and tooling review where applicable
- Pin-to-pin continuity and checks for shorts or incorrect wiring
- Application-specific insulation tests, labels and traceability records
Who Sources Custom OBD Cables?
Diagnostic Tool & Data Logger Manufacturers
Source custom OBD2 to DB9 adapter cables and extensions around your own equipment pinout, enclosure and validation requirements.
Telematics Hardware & Fleet Integration Teams
Develop OBD2 telematics wiring harnesses for device installation, branch routing and diagnostic-port access. Confirm the target vehicle and device requirements before approval.
Related Cable & Harness Solutions
Custom OBD Cables: OEM Buyer’s Guide
Use these checkpoints to prepare a complete RFQ and reduce redesign during device integration.